1.1 These General Terms and Conditions of Sale (hereinafter referred to as “GTCS”) apply to all contracts and other legal transactions between TRIPAN Leichtbauteil GmbH & Co KG, with its registered office in Hörsching and business address 4063 Hörsching, Am Kirchenholz 2, registered in the commercial register at the Regional Court of Wels (hereinafter referred to as “TRIPAN”), on the one hand, and all customers on the other, irrespective of whether the customer is a natural or a legal person; however, this applies only if the customer is an entrepreneur within the meaning of the Austrian Commercial Code (Unternehmensgesetzbuch) (for the avoidance of doubt, also if the customer is a foreign customer), but not if the customer is a consumer within the meaning of the Austrian Consumer Protection Act (KSchG).
1.2 These GTC also apply to all future transactions, even if in the individual case, in particular in the case of future supplementary or follow-up orders, no express reference has been made to them.
1.3 The version of the GTC that applies is the one available on TRIPAN's website (www.tripan.at) at the time the respective contract is concluded.
1.4 TRIPAN provides deliveries and other services exclusively on the basis of the GTC. The customer's general terms and conditions or purchasing conditions apply only if they have been expressly confirmed by TRIPAN in writing. A reference to the customer's general terms and conditions or purchasing conditions that are attached or available or obtainable at a particular location shall not be deemed express written confirmation. The customer's general terms and conditions or purchasing conditions are deemed excluded and are expressly objected to by reference to these GTC.
1.5 The following provisions concerning the delivery of goods apply mutatis mutandis to services as well.
2.1 All documents designated by TRIPAN as “offers”, “cost estimates” or similar are initially non-binding and subject to change; they are to be understood as an invitation to the customer to submit an offer and only become binding upon written order confirmation (acceptance of the customer’s offer) by TRIPAN. “Orders” are deemed binding offers by the customer to TRIPAN. Until the customer countersigns an order confirmation, TRIPAN has no obligation to perform, and performance deadlines are suspended (or extended accordingly) for the period between the issue of the order confirmation by TRIPAN and the countersigning of an order confirmation by the customer.
2.2 Assurances, warranties, and guarantees on the part of TRIPAN, or agreements deviating from these GTC in connection with the conclusion of the contract, become binding towards customers only in the case of written confirmation. Oral side agreements have no validity towards customers unless they are expressly confirmed by TRIPAN in writing. Declarations/assurances made in the course of order processing by employees who are not authorised to represent TRIPAN are not binding towards customers unless they are expressly confirmed by a person authorised to represent TRIPAN (management, authorised signatory).
2.3 Information about TRIPAN's products and services contained in catalogues, price lists, brochures, advertisements on trade fair stands, circulars, promotional mailings, or other media (information material) that is not attributable to TRIPAN must be disclosed by the customer to TRIPAN — insofar as the customer bases its decision to place an order on such information. In that case, TRIPAN can comment on its accuracy. If the customer breaches this obligation, such information is non-binding insofar as it has not been expressly declared — in writing towards customers — to be part of the contract.
2.4 All cost estimates prepared by TRIPAN are subject to a charge. Consumers within the meaning of the Austrian Consumer Protection Act are informed of the charge before the cost estimate is prepared.
2.5 The contract language and the language for handling the contract is German. TRIPAN is entitled to have all documents and records submitted to TRIPAN by the customer (or on the customer's behalf) in a language other than German in the course of drawing up and/or performing the contract translated into German. The customer is obliged to reimburse reasonable translation costs. All delivery and performance periods on TRIPAN's side are deferred for the duration of the translation.
2.6 The customer must itself ensure that the products ordered from TRIPAN meet the customer's purpose or are suitable for the use intended by the customer. In particular, the customer must ensure (and verify) that the products ordered by the customer meet and are suitable for the customer's intended use in terms of statics, safety technology, and compliance with legal standards (e.g. building codes, trade regulations, etc.) and/or technical standards (ÖNORM, DIN, etc.). In this respect, unless a specific suitability or characteristic is expressly assured in writing, TRIPAN has neither an obligation to inspect nor to warn or advise. The naming and description of the product designation or application does not alter the customer's aforementioned obligation. Insofar as TRIPAN supplies bonded components, the customer must check on its own responsibility whether these are suitable for the intended use without further mechanical securing. Depending on the product, use, and loads, damaged adhesive joints may fail cohesively or adhesively. Beyond the calculations, the customer must take into account corresponding peak stresses between the components of the composite part.
2.7 The customer alone is responsible for compliance with any public-law notification or approval obligations as well as for compliance with the required safety (product safety). The customer must verify product safety through empirical testing.
2.8 TRIPAN manufactures all products as individual pieces by hand. There is therefore no industrial or series production. No manufactured piece is completely identical to another.
2.9 Installation tolerances and positional tolerances of insert parts are large. If this is not desired, changes must be agreed in writing.
2.10 Unless expressly confirmed by TRIPAN in the item text of the order confirmation, planning, production, delivery, and documentation towards customers are carried out outside the standard TL A-0023 / EN 17460 / ISO 21368.
3.1 All prices apply EXW Hörsching in accordance with INCOTERMS 2010, as well as exclusive of value-added tax or similar taxes and, in addition, exclusive of packaging.
3.2 All prices are exclusive of sampling costs as well as exclusive of all costs for inspection and processing fixtures and any changes requested by the customer. For services requested by the customer that are not expressly covered by the original order or that constitute changes to the original order, there is a claim to reasonable remuneration. Changes in quantity on the part of the customer entitle TRIPAN, at its own discretion, to adjust any unit price or to withdraw from the contract (order).
3.3 The customer must arrange for the proper and environmentally sound disposal of scrap material. If TRIPAN is commissioned with the disposal or has to undertake it due to statutory provisions, this must additionally be remunerated by the customer to the extent agreed for this purpose, or, in the absence of a remuneration agreement, in a reasonable amount.
3.4 TRIPAN is entitled on its own account, and, upon the customer's request, also obliged, to adjust the contractually agreed remuneration if changes of at least 5% have occurred since conclusion of the contract with regard to (a) labour costs due to legislation, ordinance, collective agreement, or works agreements, or (b) other cost factors necessary for the provision of services, such as material costs, due to recommendations of the Joint Commissions or changes in national or world market prices for raw materials, changes in relevant exchange rates, etc. The adjustment is made to the extent that the actual production costs at the time of conclusion of the contract change compared to those at the time of the actual provision of services, provided that TRIPAN is not in default.
3.5 In the case of continuing obligations, the remuneration is agreed to be value-secured according to the CPI 2020, whereby the remuneration is adjusted accordingly. The baseline is the month in which the contract was concluded.
4.1 Delivery and completion dates are binding towards customers only if their observance has been expressly promised in writing as a “binding delivery date”. All other statements of delivery dates are merely non-binding estimates.
4.2 If the start of performance or the performance itself is delayed or interrupted by circumstances attributable to the customer, in particular due to a breach of the duties to cooperate under point 13 of these GTC, or because agreed advance payments have not been made, or because agreed provisions of materials have not been made in good time, then performance periods are extended accordingly and agreed completion dates are postponed accordingly.
4.3 Deadlines and dates are postponed in the event of force majeure, strikes, unforeseeable delays by TRIPAN's suppliers that are not the fault of TRIPAN, or other comparable events beyond TRIPAN's control, for the period during which the respective event continues.
4.4 In the event of a delay in performance of the contract by TRIPAN of more than 8 weeks, the customer is entitled to withdraw from the contract after setting a reasonable grace period of at least two weeks. The setting of the grace period must be made in writing by registered letter, with simultaneous notice of withdrawal. Services rendered up to that point must be paid for by the customer.
4.5 Minor changes to the performance by TRIPAN that are reasonable for the customer and objectively justified are deemed to be approved in advance. Towards consumers within the meaning of the Austrian Consumer Protection Act, this right exists only if it is negotiated in the individual case.
4.6 Objectively justified or agreed partial deliveries and partial services are permitted and may be invoiced separately and must be paid within the agreed payment term.
4.7 Deviations from the ordered quantity of up to +/- 10% are permitted. TRIPAN is entitled to withhold subsequent deliveries if partial payments have not been made.
4.8 TRIPAN is not obliged to accept follow-up orders; expressly not even if the customer's moulds, tools, and fixtures are still owned by TRIPAN or TRIPAN is still holding them in safekeeping.
4.9 TRIPAN has the right to cancel accepted orders at any time if TRIPAN has reason to believe that the products to be supplied by TRIPAN are being used in an overall product or overall construction that does not offer the necessary safety in technical terms, whereby a reversal of the burden of proof applies towards customers, so that they must prove that their overall product/overall construction offers the necessary safety.
5.1 The risk passes to the customer upon leaving the factory, even in the case of carriage-free delivery. In the event of delays for which the customer is responsible (even if not necessarily at fault), the risk passes as early as notification of readiness for dispatch. Furthermore, the goods are deemed to have already been handed over, and TRIPAN is entitled to issue invoices and to demand payment within the agreed period.
5.2 Unless otherwise agreed, TRIPAN selects the packaging and shipping method at its best discretion. Only at the customer's written request and at the customer's expense will the goods be insured against breakage, transport, and fire damage.
5.3 The risk for materials and equipment delivered by TRIPAN and stored at the place of performance is borne by the customer.
6.1 If the customer is in default of acceptance or of advance performance (refusal of acceptance, delay in advance performance, or otherwise) for longer than seven (7) days, and if, despite the setting of a reasonable grace period, the customer has not remedied the circumstances attributable to it that delay or prevent performance, TRIPAN may, while the contract remains in force, otherwise dispose of the equipment and materials specific to the performance, provided that, in the event of continuation of the performance, TRIPAN can reprocure them within a period appropriate to the respective opportunities.
6.2 In the event of the customer's default of acceptance or of advance performance, TRIPAN is likewise entitled, when insisting on performance of the contract, to store the goods at TRIPAN or in a nearby warehouse, for which TRIPAN is owed a weekly storage fee in the amount of the costs incurred by TRIPAN, but in any case in the amount of 10% of the order value.
6.3 This does not affect TRIPAN's right to make the remuneration for services rendered due for payment or to withdraw from the contract after a reasonable grace period.
6.4 In the event of a justified withdrawal from the contract by TRIPAN, TRIPAN may demand from the customer liquidated damages in the amount of 95% of the order value plus VAT without proof of the actual damage. The customer's obligation to pay damages is independent of fault. The assertion of a higher amount of damage is permitted.
7.1 The goods delivered, installed, or otherwise handed over by TRIPAN remain the property of TRIPAN until payment in full.
7.2 In the event of TRIPAN's consent, the purchase price claim is already deemed assigned to TRIPAN as of now. Any legal transaction fees levied for such an assignment are to be borne by the customer, who must fully indemnify and hold TRIPAN harmless in this regard.
7.3 If the customer is in default of payment, TRIPAN is entitled, upon setting a reasonable grace period, to demand the return of the goods subject to retention of title. Towards consumers within the meaning of the Austrian Consumer Protection Act as customers, TRIPAN may exercise this right only if at least one outstanding performance of the consumer has been due for at least six weeks and TRIPAN has, under threat of this legal consequence and setting a grace period of at least two weeks, unsuccessfully sent a reminder.
7.4 The customer must notify TRIPAN without delay of the opening of insolvency proceedings over its assets or of the seizure of TRIPAN's goods subject to retention of title.
7.5 TRIPAN is entitled, in order to enforce its retention of title, to enter the location of the goods subject to retention of title, insofar as reasonable for the customer, upon reasonable prior notice.
7.6 Necessary costs appropriate for the purposeful pursuit of rights are borne by the customer.
7.7 The enforcement of the retention of title constitutes a withdrawal from the contract only if this is expressly declared.
7.8 TRIPAN may realise the returned goods subject to retention of title towards customers by private sale and in the best possible manner.
8.1 All payments must be made exclusively in euros.
8.2 Unless otherwise agreed, the purchase price is to be paid within 30 days of the invoice date. Any agreed granting of a cash discount is in any case conditional upon the settlement of all earlier due invoices.
8.3 For payment defaults, a default interest rate of 2% per month, capitalised quarterly, applies irrespective of a reminder or of the customer's fault if the customer exceeds the payment period pursuant to point 8.2. The default interest begins to run on the day after the payment falls due. TRIPAN reserves the right to assert further reminder charges as well as the costs for engaging a debt collection agency or a lawyer.
8.4 The assertion of further damages caused by default remains reserved, but towards consumers within the meaning of the Austrian Consumer Protection Act as customers only if this is individually negotiated.
8.5 If the customer is in default of payment under other contractual relationships existing with TRIPAN, TRIPAN is entitled to suspend the performance of TRIPAN's obligations under this contract until performance by the customer. TRIPAN is then also entitled to make all claims for services already rendered from the ongoing business relationship with the customer due for payment. Towards consumers within the meaning of the Austrian Consumer Protection Act as customers, this applies only in the event that an outstanding performance has been due for at least six weeks and TRIPAN has, under threat of this consequence and setting the customer a grace period of at least two weeks, unsuccessfully sent a reminder. All delivery and/or performance periods are extended by the duration of the payment default plus a re-set-up time of two weeks for each (partial) payment default.
8.6 The customer is entitled to a right of set-off only insofar as counterclaims have been established by a court or acknowledged by TRIPAN. Consumers within the meaning of the Austrian Consumer Protection Act as customers are also entitled to a right of set-off insofar as counterclaims are legally connected with the customer's payment obligation, as well as in the event of TRIPAN's insolvency.
9.1 In the event that materials are provided by the customer as agreed, these must be delivered at the customer's cost and risk with a reasonable quantity surcharge, but at least 5%, in good time and in accordance with the agreement and the purpose of the provision of materials. If these conditions are not met, the delivery time is extended reasonably, but at least until the next capacity window in TRIPAN's operations, and the customer must compensate for the damage arising on TRIPAN's side, including damage due to production interruptions, except in the case of force majeure.
9.2 TRIPAN assumes no liability or warranty whatsoever for equipment or materials provided by the customer and for any defects or poor performance caused by such equipment or materials.
10.1 Insofar as deliveries or services that TRIPAN must provide to a particular customer in accordance with the contract are to be onward-delivered or provided by the customer to a third party (this third party hereinafter referred to as the “end customer”), and the customer commits a breach of contract towards TRIPAN (such as, in particular, default of payment or default of acceptance), TRIPAN is entitled — without prejudice to the rights under point 6 of this contract and without prejudice to TRIPAN's other claims (in particular claims for damages) arising from such a breach of contract — to deliver or perform directly to the end customer, bypassing TRIPAN's customer.
10.2 In this case, the delivery or service is deemed to have been rendered towards the customer once it has been rendered towards the end customer.
11.1 Unless expressly agreed in writing, TRIPAN gives no warranty that the products supplied by TRIPAN meet the customer's purpose or are suitable for the use intended by the customer. The mention of an application example or of use in an overall product or overall construction expressly does not mean that a particular product is suitable for that application. Reference is made to point 2.6.
11.2 Unless expressly agreed, TRIPAN gives no warranty that the products supplied meet the requirements or provisions of a particular technical standard, such as ÖNORMs or DIN, or of a particular legal standard (e.g. building codes, trade regulations).
11.3 Unless expressly agreed, TRIPAN gives no warranty that surfaces have a particular visual appearance. The customer acknowledges that, in the products manufactured by TRIPAN, even with the exercise of due care, waviness in the surface or other irregularities regarding colour, surface, and dimensions and other characteristics cannot be avoided for technical reasons. Any warranty and/or liability in this regard is excluded. The same applies to minor adhesive squeeze-out or minor soiling from adhesive in manually bonded components.
11.4 In general, agreed characteristics within the meaning of § 922 para. 1 ABGB are expressly only those characteristics that have been expressly agreed in writing. Compliance with other characteristics is excluded to the extent legally possible.
11.5 Any warranty for ordinarily expected characteristics within the meaning of § 922 para. 1 ABGB is excluded to the extent legally possible.
11.6 Unless expressly agreed, TRIPAN assumes no liability or warranty whatsoever for a particular service life of supplied products.
11.7 Unless otherwise agreed, material of medium quality is used for processing; it is the customer's responsibility to specify better materials and processing methods, as well as tolerances, for particularly stressed parts if this appears necessary.
11.8 Towards customers, the warranty generally presupposes the fulfilment of the customer's contractual obligations towards TRIPAN under the relevant contracts and other contracts.
11.9 The warranty period towards customers is six months from handover.
11.10 Unless otherwise agreed (e.g. in the case of an agreement on formal acceptance), the time of handover is the time of completion, at the latest once the customer has taken the service into its power of disposal or has refused acceptance without stating reasons.
11.11 Remedying a defect alleged by the customer does not constitute an acknowledgement of that defect alleged by the customer.
11.12 The customer must grant TRIPAN at least two attempts to remedy defects.
11.13 If the customer's allegations of defects are unjustified, the customer is obliged to reimburse TRIPAN for the expenses incurred in establishing the absence of defects or in remedying the fault.
11.14 The customer must always prove that the defect was already present at the time of handover.
11.15 The customer has the duty to carefully inspect all deliveries and services rendered by TRIPAN for defects immediately after the time of handover. Defects in the object of delivery or service that the customer has identified, or should have identified, through inspection in the ordinary course of business upon acceptance or handover must be reported to TRIPAN in writing without delay, at the latest two days after handover. Hidden defects must likewise be reported within this reasonable period from discovery. If a notice of defects is not raised in good time, the goods or service are deemed approved.
11.16 Any use or processing of the defective object of performance through which further damage is threatened or the ascertainment of the cause is impeded or prevented must be discontinued by the customer without delay, insofar as this is not unreasonable.
11.17 The defective delivery or samples thereof must — insofar as economically reasonable — be returned by the customer to TRIPAN. The costs of returning the defective item to TRIPAN are borne entirely by the customer.
11.18 The customer has the obligation to enable TRIPAN to establish a defect without delay.
11.19 The warranty is excluded if the customer's technical installations, such as supply lines, cabling, and the like, are not in a technically flawless and operational condition or are not compatible with the delivered items, insofar as this circumstance is causal for the defect.
12.1 On account of the breach of contractual or pre-contractual obligations, in particular on account of impossibility, delay, etc., TRIPAN is liable for financial losses only in cases of intent.
12.2 Towards customers, the limitation periods of § 1489 ABGB are shortened such that claims for damages against TRIPAN must be asserted in court within six months of becoming aware of the damage and the party causing it, but at the latest within two years of conclusion of the contract, failing which they become time-barred.
12.3 Towards customers, liability, irrespective of the legal basis of liability (contract, tort, strict liability, or other legal basis), is limited, to the extent legally permissible, to the lower of the following two amounts: (a) the actual coverage amount of any liability insurance taken out by TRIPAN, or (b) the order value of the contract whose obligations TRIPAN has breached. This limitation also applies with regard to damage to an item that TRIPAN has taken over for processing.
12.4 Subject to any provision to the contrary in these GTC, any liability of TRIPAN towards the customer for production stoppage, lost profit, loss of use, loss of contracts, or any other consequential damage is excluded.
12.5 The exclusion of liability also covers claims against TRIPAN's employees, agents, and vicarious agents on account of damage they cause to the customer without reference to a contract on their part with the customer.
12.6 TRIPAN's liability is excluded for damage due to improper handling or storage, overuse, failure to follow operating and installation instructions, faulty assembly, commissioning, servicing, or maintenance by the customer or by third parties not authorised by TRIPAN, or natural wear and tear, insofar as this event was causal for the damage. Likewise, the exclusion of liability applies to the omission of necessary maintenance, unless TRIPAN has contractually assumed the obligation to perform maintenance.
12.7 Any liability for a sudden component failure of the products supplied by TRIPAN (e.g. in the case of bonded products) is excluded in the event that these are used in an overall product or overall construction that does not offer the necessary safety, for instance because no additional mechanical safeguards to protect against component failure of bonded products were provided.
12.8 If and insofar as the customer can claim insurance benefits for damage for which TRIPAN is liable through its own damage insurance or one taken out in its favour (e.g. liability insurance, comprehensive cover, transport, fire, business interruption, and others), the customer undertakes to claim the insurance benefits, and TRIPAN's liability is limited in this respect to the disadvantages arising for the customer from claiming this insurance (e.g. higher insurance premiums).
13.1 TRIPAN's obligation to perform begins at the earliest once the customer has created the structural, technical, and legal conditions for performance that were described in the contract or in the information provided to the customer before conclusion of the contract, or that the customer must have known on the basis of relevant expertise or experience.
13.2 If the customer fails to fulfil this duty to cooperate, then — exclusively with regard to the performance capability not fully available as a result of incorrect customer information — TRIPAN's performance is not defective.
13.3 The customer must arrange for the necessary approvals of third parties as well as notifications and approvals by authorities at its own expense.
14.1 Plans, sketches, cost estimates, and other documents provided by TRIPAN or created through a contribution by TRIPAN remain the intellectual property of TRIPAN.
14.2 The use of such documents outside their intended purpose, in particular the passing on, reproduction, publication, and making available, including even partial copying, requires the express consent of TRIPAN.
14.3 The customer furthermore undertakes to keep secret from third parties the knowledge that has come to it from the business relationship.
15.1 The customer is liable to TRIPAN for the freedom of the commissioned deliveries and services from third-party property rights. If the customer provides intellectual creations or documents and third-party property rights are asserted with regard to such creations, TRIPAN is entitled to suspend the manufacture of the object of delivery at the customer's risk until the third-party rights have been clarified, and to claim reimbursement of the necessary and appropriate costs incurred by TRIPAN, unless the unjustified nature of the claims is obvious.
15.2 The customer shall indemnify and hold TRIPAN harmless in this regard.
15.3 TRIPAN is entitled to demand reasonable advances on costs from customers for any litigation costs.
16.1 If import and export licences or foreign exchange approvals or similar approvals are required for the performance of the contract with the customer, the customer must make all reasonable efforts to obtain the necessary licences or approvals in good time.
16.2 Should individual parts of these GTC be invalid, the validity of the remaining parts shall not be affected thereby. TRIPAN and the customer already now jointly undertake — from the perspective of honest contracting parties — to agree on a replacement provision that comes closest to the economic result of the invalid provision.
16.3 Austrian law applies, to the exclusion of the referral and conflict-of-law rules of private international law and of the UN Convention on Contracts for the International Sale of Goods. The place of performance is the registered office of TRIPAN.
16.4 The exclusive place of jurisdiction for all disputes arising out of (or in connection with) the contractual relationship or future contracts between TRIPAN and the customer is the court with subject-matter jurisdiction for Linz.